Bently Nevada 86517-01-01-01-02 Monitoring Module

Product Introduction

TenBN offers the genuine Bently Nevada 86517-01-01-01-02, a monitoring module built for the demands of continuous machinery protection. The component is held in inventory for fast shipment to plants operating turbines, compressors, pumps, and other rotating assets.

Technical Parameters

• Model: 86517-01-01-01-02
• Product Type: Monitoring Module
• Product Series: 3300
• Origin: U.S.A Accelerometer Interface Module
• Transducer charge input sensitivity Option: 01 = 50 pC/g
• Filter corner frequency Option: 01 = 25 Hz high pass corner, 350 Hz low pass corner
• DC Signal Bias Voltage: 01 = -10 Vdc, No other option available
• Agency Approval: 02 = CENELEC (SIRA)
• Dimensions (LxWxH): 13.97cm x 8.26cm x 7.62cm
• Supply Voltage: -23 Vdc to -26 Vdc
• Current Draw: 22 mA maximum
• Acceleration: Differential input from a piezoelectric accelerometer
• Overload: 50,000 pC peak for accelerometers with 50 pC/g pk
• Sensitivity: 10 mV/g pk (1.02 mV/m/s2 pk) balanced output, 50

Parameter Analysis

Each option block in the 86517-01-01-01-02 part number defines one element of the hardware configuration, from mechanical dimensions to connector style and approval suffix. The transducer charge input sensitivity Option specifies 01 = 50 pC/g. The filter corner frequency Option specifies 01 = 25 Hz high pass corner, 350 Hz low pass corner. The unit is rated for operation from +32° F to +158° F (0° C to 70° C).

Monitoring modules form the decision layer of the protection system, turning transducer signals into alarms and trips; keeping channels on consistent part numbers preserves documented measurement accuracy.

Application Scenarios

Within the protection rack, this module provides the channel-level processing that turns raw machinery measurements into actionable operator information.

Installation Guide

Insert the module into its designated rack slot, confirm the option string and position match the system configuration, wire the field terminals per the machine drawing, and verify channel alarms and trips before returning the protection system to service.

Compatibility

This component belongs to the Bently Nevada condition monitoring portfolio and is engineered to work with the associated probes, extension cables, Proximitors, and monitoring hardware of the same system. Bently Nevada components sharing the same part number are fully interchangeable, so a stocked spare can be fitted without re-engineering the measurement loop. TenBN can supply the complete chain under consistent part numbers.

Maintenance Advice

Review channel status, alarm settings, and module indicators during routine maintenance windows, and confirm field wiring integrity at the terminals. Keep the unit within its +32° F to +158° F (0° C to 70° C) operating envelope in service and storage.

Procurement Advice

Confirm the complete part number against your machine’s bill of materials before ordering, since each option digit changes the mechanical or electrical fit. TenBN stocks genuine Bently Nevada components and provides the official service documentation for this model. For inventory, pricing, and lead time on the 86517-01-01-01-02, contact [email protected].

Frequently Asked Questions

What is the operating temperature range?

The unit is rated from +32° F to +158° F (0° C to 70° C), covering the temperature extremes typical of turbomachinery installations.

Can this spare be interchanged with existing components?

Bently Nevada components sharing the same part number are fully interchangeable, so this spare can replace an existing unit without recalibrating the loop when the complete part number matches.

How do I confirm the right part number?

Check every option digit against the machine bill of materials, then contact [email protected] with the full string; the TenBN team will confirm fit, stock, and documentation.