Bently Nevada 3500/94M-05-00-01 VGA Display Module

Product Introduction

The Bently Nevada 3500/94M-05-00-01 is a monitoring module (VGA Display Module), engineered for continuous protection of rotating machinery. TenBN supplies this genuine Bently Nevada component with full documentation and ready stock for plants running condition monitoring programs on critical equipment.

Technical Parameters

• Model: 3500/94M-05-00-01
• Product Type: VGA Display Module
• Product Series: 3500
• Origin: U.S.A Ordering Information System Display
• Display Size and Mounting: 05 = 15" display, 19" rack mount
• KVM Extender and Display Router Box Cables: 00 = None
• Agency approval Option: ：01 = CSA/NRTL/C (Class I, Division 2)
• Weight: 1.07 Kg
• Inrush Current: 2.62 A @ 24 V
• Operating Current: < 500 mA
• Panel Cutout: 396 mm (15.59
• Screen Size: 15” diagonal
• Type: LCD with LED backlight
• Industrial hardened: Yes

Parameter Analysis

The ordering string of the 3500/94M-05-00-01 encodes its physical and electrical configuration, so every digit should be checked against the machine drawing before substitution. The agency approval Option specifies ：01 = CSA/NRTL/C (Class I, Division 2). The unit is rated for operation from 0 to 60°C ( 32°F to 140°F). Compliance documentation covers ：01 = CSA/NRTL/C (Class I, Division 2).

Monitoring modules form the decision layer of the protection system, turning transducer signals into alarms and trips; keeping channels on consistent part numbers preserves documented measurement accuracy.

Application Scenarios

This module is part of the monitoring rack that protects turbines, compressors, pumps, and other rotating machinery, processing transducer signals into alarms, trip outputs, and data for predictive maintenance programs.

Installation Guide

Insert the module into its designated rack slot, confirm the option string and position match the system configuration, wire the field terminals per the machine drawing, and verify channel alarms and trips before returning the protection system to service.

Compatibility

This component belongs to the 3500 series monitoring rack and is engineered to work with the associated probes, extension cables, Proximitors, and monitoring hardware of the same system. Bently Nevada components sharing the same part number are fully interchangeable, so a stocked spare can be fitted without re-engineering the measurement loop. TenBN can supply the complete chain under consistent part numbers.

Maintenance Advice

Review channel status, alarm settings, and module indicators during routine maintenance windows, and confirm field wiring integrity at the terminals. Keep the unit within its 0 to 60°C ( 32°F to 140°F) operating envelope in service and storage.

Procurement Advice

Confirm the complete part number against your machine’s bill of materials before ordering, since each option digit changes the mechanical or electrical fit. TenBN stocks genuine Bently Nevada components and provides the official service documentation for this model. For inventory, pricing, and lead time on the 3500/94M-05-00-01, contact [email protected].

Frequently Asked Questions

What is the operating temperature range?

The unit is rated from 0 to 60°C ( 32°F to 140°F), covering the temperature extremes typical of turbomachinery installations.

What approvals or certifications does it carry?

Compliance documentation covers ：01 = CSA/NRTL/C (Class I, Division 2). Confirm the approval suffix on your part number before ordering for hazardous-area use.

Can this spare be interchanged with existing components?

Bently Nevada components sharing the same part number are fully interchangeable, so this spare can replace an existing unit without recalibrating the loop when the complete part number matches.

How do I confirm the right part number?

Check every option digit against the machine bill of materials, then contact [email protected] with the full string; the TenBN team will confirm fit, stock, and documentation.