Bently Nevada 3500/33-01-00 Monitoring Module

Product Introduction

The Bently Nevada 3500/33-01-00 is a monitoring module that supports reliable condition monitoring on rotating machinery. As a genuine Bently Nevada part, it integrates with existing protection loops and is available from TenBN with the official service documentation.

Technical Parameters

• Model: 3500/33-01-00
• Product Type: Monitoring Module
• Product Series: 3500
• Origin: U.S.A Output module
• Output module: 01 = 16-Channel relay output module
• Agency approval Option: 00 = None
• Dimensions ( D x W x H ): 24.20 cm x 2.44 cm x 24.10 cm
• Weight: 0.70 Kg
• Power Consumption: 5.8 watts typical
• OK LED: Illuminated when the 3500/33 16-Channel Relay Module is operating properly
• TX/RX LED: Transmit and receive flashes when the 3500/3316-Channel Relay Module is communicating with other modules in the 3500 rack
• CH Alarm LED: Illuminated when Relay channel is in an alarm state
• Relay Type: Single-pole
• Relay Environmental Sealing: Epoxy-sealed

Parameter Analysis

Configuration of the 3500/33-01-00 is carried entirely in its part number, which makes the full string the reference point for spare parts planning and system design. The agency approval Option specifies 00 = None.

Monitoring modules form the decision layer of the protection system, turning transducer signals into alarms and trips; keeping channels on consistent part numbers preserves documented measurement accuracy.

Application Scenarios

This module is part of the monitoring rack that protects turbines, compressors, pumps, and other rotating machinery, processing transducer signals into alarms, trip outputs, and data for predictive maintenance programs.

Installation Guide

Insert the module into its designated rack slot, confirm the option string and position match the system configuration, wire the field terminals per the machine drawing, and verify channel alarms and trips before returning the protection system to service.

Compatibility

This component belongs to the 3500 series monitoring rack and is engineered to work with the associated probes, extension cables, Proximitors, and monitoring hardware of the same system. Bently Nevada components sharing the same part number are fully interchangeable, so a stocked spare can be fitted without re-engineering the measurement loop. TenBN can supply the complete chain under consistent part numbers.

Maintenance Advice

Review channel status, alarm settings, and module indicators during routine maintenance windows, and confirm field wiring integrity at the terminals.

Procurement Advice

Confirm the complete part number against your machine’s bill of materials before ordering, since each option digit changes the mechanical or electrical fit. TenBN stocks genuine Bently Nevada components and provides the official service documentation for this model. For inventory, pricing, and lead time on the 3500/33-01-00, contact [email protected].

Frequently Asked Questions

Can this spare be interchanged with existing components?

Bently Nevada components sharing the same part number are fully interchangeable, so this spare can replace an existing unit without recalibrating the loop when the complete part number matches.

How do I confirm the right part number?

Check every option digit against the machine bill of materials, then contact [email protected] with the full string; the TenBN team will confirm fit, stock, and documentation.