Bently Nevada 200350-01-00-CN 200350 Accelerometers

Product Introduction

The Bently Nevada 200350-01-00-CN (200350 Accelerometers) is a vibration sensor that supports reliable condition monitoring on rotating machinery. As a genuine Bently Nevada part, it integrates with existing protection loops and is available from TenBN with the official service documentation.

Technical Parameters

• Model: 200350-01-00-CN
• Product Type: 200350 Accelerometers
• Product Series: 200350 / 200355
• Origin: U.S.A Mounting Stud
• Mounting Stud: 01 = ¼-28 to M6 x 1.00 Stainless Steel
• Tolerance: 00 = 100 mV/g ± 20%
• Agency approvals Option: CN=Country Specific
• Hex Size: 11/16” (1.8 cm)
• Height: 1.65” (4.24 cm)
• Weight: 0.051 Kg
• Broadband Electrical Noise (1-10kHz): 350 μg (3,434 μm/s2)
• Output Bias Voltage: 8 to 12 VDC
• Excitation Voltage: 18 to 28 VDC
• Constant Current Excitation: 2 to 20 mA

Parameter Analysis

Configuration of the 200350-01-00-CN is carried entirely in its part number, which makes the full string the reference point for spare parts planning and system design. The agency approvals Option specifies cN=Country Specific. Compliance documentation covers cN=Country Specific.

Sensor output is specified together with the associated monitoring machinery, so consistent part numbers across the loop keep sensitivity and linearity within their documented limits.

Application Scenarios

This sensor monitors casing vibration or related machinery parameters on rotating equipment, providing the measurement signal that the monitoring system uses for alarm and trip decisions.

Installation Guide

Mount the sensor at the documented location on the machine casing, torque the stud to specification, and route the cable to the monitor with correct shielding. Confirm the measurement channel responds before returning the train to operation.

Compatibility

This component belongs to the Bently Nevada condition monitoring portfolio and is engineered to work with the associated probes, extension cables, Proximitors, and monitoring hardware of the same system. Bently Nevada components sharing the same part number are fully interchangeable, so a stocked spare can be fitted without re-engineering the measurement loop. TenBN can supply the complete chain under consistent part numbers.

Maintenance Advice

Check the sensor mounting, cable, and connector condition during outages, and verify the measurement channel still responds to a known input.

Procurement Advice

Confirm the complete part number against your machine’s bill of materials before ordering, since each option digit changes the mechanical or electrical fit. TenBN stocks genuine Bently Nevada components and provides the official service documentation for this model. For inventory, pricing, and lead time on the 200350-01-00-CN, contact [email protected].

Frequently Asked Questions

What approvals or certifications does it carry?

Compliance documentation covers cN=Country Specific. Confirm the approval suffix on your part number before ordering for hazardous-area use.

Can this spare be interchanged with existing components?

Bently Nevada components sharing the same part number are fully interchangeable, so this spare can replace an existing unit without recalibrating the loop when the complete part number matches.

How do I confirm the right part number?

Check every option digit against the machine bill of materials, then contact [email protected] with the full string; the TenBN team will confirm fit, stock, and documentation.