Bently Nevada 190501-11-00-00 Velomitor CT Velocity Transducer

Product Introduction

The Bently Nevada 190501-11-00-00 (Velomitor CT Velocity Transducer) is a vibration sensor that supports reliable condition monitoring on rotating machinery. As a genuine Bently Nevada part, it integrates with existing protection loops and is available from TenBN with the official service documentation.

Technical Parameters

• Model: 190501-11-00-00
• Product Type: Velomitor CT Velocity Transducer
• Product Series: 190501
• Origin: U.S.A
• Mounting hardware Option: 1 1 Plate Stud 3/8-in 24 to 1/4-in 28
• Connection Option: 0 0 MIL-C-5015 connection interface
• Agency approval Option: 00 = No approvals
• Weight: 0.297 Kg

Parameter Analysis

Configuration of the 190501-11-00-00 is carried entirely in its part number, which makes the full string the reference point for spare parts planning and system design. The mounting hardware Option specifies 1 1 Plate Stud 3/8-in 24 to 1/4-in 28. The connection Option specifies 0 0 MIL-C-5015 connection interface. The agency approval Option specifies 00 = No approvals. The unit is rated for operation from -40°C to +85°C (-40°F to +185°F). Compliance documentation covers no approvals.

Sensor output is specified together with the associated monitoring machinery, so consistent part numbers across the loop keep sensitivity and linearity within their documented limits.

Application Scenarios

Installed on machine trains in power generation and process industries, this sensor feeds casing-level vibration data to the protection system for early fault detection.

Installation Guide

Mount the sensor at the documented location on the machine casing, torque the stud to specification, and route the cable to the monitor with correct shielding. Confirm the measurement channel responds before returning the train to operation.

Compatibility

This component belongs to the Bently Nevada condition monitoring portfolio and is engineered to work with the associated probes, extension cables, Proximitors, and monitoring hardware of the same system. Bently Nevada components sharing the same part number are fully interchangeable, so a stocked spare can be fitted without re-engineering the measurement loop. TenBN can supply the complete chain under consistent part numbers.

Maintenance Advice

Check the sensor mounting, cable, and connector condition during outages, and verify the measurement channel still responds to a known input. Keep the unit within its -40°C to +85°C (-40°F to +185°F) operating envelope in service and storage.

Procurement Advice

Confirm the complete part number against your machine’s bill of materials before ordering, since each option digit changes the mechanical or electrical fit. TenBN stocks genuine Bently Nevada components and provides the official service documentation for this model. For inventory, pricing, and lead time on the 190501-11-00-00, contact [email protected].

Frequently Asked Questions

What is the operating temperature range?

The unit is rated from -40°C to +85°C (-40°F to +185°F), covering the temperature extremes typical of turbomachinery installations.

What approvals or certifications does it carry?

Compliance documentation covers no approvals. Confirm the approval suffix on your part number before ordering for hazardous-area use.

Can this spare be interchanged with existing components?

Bently Nevada components sharing the same part number are fully interchangeable, so this spare can replace an existing unit without recalibrating the loop when the complete part number matches.

How do I confirm the right part number?

Check every option digit against the machine bill of materials, then contact [email protected] with the full string; the TenBN team will confirm fit, stock, and documentation.