Bently Nevada 177230-02-01-CN Seismic Transmitter

Product Introduction

The Bently Nevada 177230-02-01-CN (Seismic Transmitter) is a vibration sensor that supports reliable condition monitoring on rotating machinery. As a genuine Bently Nevada part, it integrates with existing protection loops and is available from TenBN with the official service documentation.

Technical Parameters

• Model: 177230-02-01-CN
• Product Type: Seismic Transmitter
• Product Series: 177230
• Origin: U.S.A Measurement Range
• Measurement Range: 02 0 – 50.8 mm/s (0 – 2.0 in/s)
• Frequency: 01 10 Hz to 1 kHz (600 to 60 kcps) RMS (Root Mean Square)
• Approvals: CN Country Specific
• Relative Humidity of Transmitter: To 100% non-submerged
• Diameter: 25.4 mm (1.00 in)
• Height: 66.0 mm (2.60 in)
• Case Material: 316L stainless steel
• Connector: 3-pin MIL-C-5015, 316L stainless steel
• Mounting Hole in Body: 1/4-28 UNF
• Weight: 0.131 Kg

Parameter Analysis

Configuration of the 177230-02-01-CN is carried entirely in its part number, which makes the full string the reference point for spare parts planning and system design. The unit is rated for operation from -40°C to +85°C (-40°F to +185°F). Compliance documentation covers cN Country Specific.

Sensor output is specified together with the associated monitoring machinery, so consistent part numbers across the loop keep sensitivity and linearity within their documented limits.

Application Scenarios

Installed on machine trains in power generation and process industries, this sensor feeds casing-level vibration data to the protection system for early fault detection.

Installation Guide

Mount the sensor at the documented location on the machine casing, torque the stud to specification, and route the cable to the monitor with correct shielding. Confirm the measurement channel responds before returning the train to operation.

Compatibility

This component belongs to the Bently Nevada condition monitoring portfolio and is engineered to work with the associated probes, extension cables, Proximitors, and monitoring hardware of the same system. Bently Nevada components sharing the same part number are fully interchangeable, so a stocked spare can be fitted without re-engineering the measurement loop. TenBN can supply the complete chain under consistent part numbers.

Maintenance Advice

Check the sensor mounting, cable, and connector condition during outages, and verify the measurement channel still responds to a known input. Keep the unit within its -40°C to +85°C (-40°F to +185°F) operating envelope in service and storage.

Procurement Advice

Confirm the complete part number against your machine’s bill of materials before ordering, since each option digit changes the mechanical or electrical fit. TenBN stocks genuine Bently Nevada components and provides the official service documentation for this model. For inventory, pricing, and lead time on the 177230-02-01-CN, contact [email protected].

Frequently Asked Questions

What is the operating temperature range?

The unit is rated from -40°C to +85°C (-40°F to +185°F), covering the temperature extremes typical of turbomachinery installations.

What approvals or certifications does it carry?

Compliance documentation covers cN Country Specific. Confirm the approval suffix on your part number before ordering for hazardous-area use.

What connector or interface does it use?

It uses -pin MIL-C-5015, 316L stainless steel, matching the standard Bently Nevada measurement chain.

Can this spare be interchanged with existing components?

Bently Nevada components sharing the same part number are fully interchangeable, so this spare can replace an existing unit without recalibrating the loop when the complete part number matches.