The Bently Nevada 330904-00-15-70-12-00 is a Connector and Cable Type Option:12= Miniature coaxial ClickLoc connector for industrial control and automation applications.
Product Overview
Bently Nevada 330904-00-15-70-12-00 is a 3300 NSv proximity probe designed for precise displacement and vibration measurement on rotating machinery. It features an M8X1 thread, stainless steel armor, and a 7.0-meter (23.0 feet) FluidLoc cable with a miniature coaxial ClickLoc connector. The probe operates over a frequency range of 0 to 10 kHz with a typical +0, -3 dB response, ensuring reliable signal capture for condition monitoring systems.
Key Specifications and Performance
- Linear Range: 1.5 mm (60 mils), from 0.25 to 1.75 mm (10 to 70 mils) approximately -1 to -13 Vdc.
- Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) +12.5%/-20% including interchangeability error.
- Frequency Response: 0 to 10 kHz: +0, -3 dB typical, with up to 305 meters (1000 feet) of field wiring.
- Operating Temperature: -52°C to +177°C (-62°F to +351°F).
- Probe Tip Material: Polyphenylene sulfide (PPS); case material AISI 304 stainless steel.
- Connector: Miniature coaxial ClickLoc, FluidLoc cable.
These specifications enable accurate axial position and vibration measurements on shafts with a minimum target size of 8.9 mm (0.35 in) diameter. The recommended gap setting is 1.0 mm (40 mils), and the probe’s side-view characteristics simplify gapping compared to older models.
Applications and Compatibility
The 330904-00-15-70-12-00 is mechanically and electrically compatible with Bently Nevada’s previous 3300 RAM probes and extension cables. Its increased chemical resistance makes it suitable for process compressor applications where exposure to harsh media is a concern. Typical uses include steam turbines, gas turbines, compressors, pumps, and motors, where continuous monitoring of shaft position and vibration is critical for safe operation.
Installation and Maintenance
Install the probe using the M8X1 thread, ensuring a maximum thread engagement of 12 mm. Finger-tight is recommended, with a maximum torque of 0.56 N·m (5 in·lb). The minimum bend radius is 25.4 mm (1.0 in) with or without stainless steel armor. For field wiring, use three-conductor shielded triad cable with a maximum length of 305 meters (1,000 feet) between the probe and the 3300 XL NSv Proximitor Sensor. Periodic inspection of the probe tip and cable is advised to maintain measurement accuracy.
Why Choose TenBN for Your Bently Nevada Needs
As an authorized distributor, TenBN supplies genuine Bently Nevada original spare parts, including This unit. We offer fast global shipping from China and competitive pricing for industrial MRO. Contact TenBN for Bently Nevada parts pricing and availability.
Need a quote for this product?
Send us your required quantity and delivery timeline. We reply within 24 hours with factory-direct pricing. Worldwide shipping via DHL / FedEx / UPS / TNT.
Request a Quote or email [email protected] or call +86 167 4013 5928
